|
|
|
|
| Functions |
Using this system, the test piece is placed in the
machine operating area, selected according to the
piece size: its height can range from 50 mm
minimum in multiples of 50 mm , to 215 mm (or
higher on request).
- High working speed: the
test cycle duration conforms to international
standards and can be -set-by the operator. High
accuracy of results, reproducibility and
repeatability, the reference point working
autonomy implies that all alterations
(adjustments, deformations, impurities on test
blocks and supports), present in the area above or
below the reference point, have no influence on
the test. The mechanical and physical
characteristics of the supports ,similarly, have
no influence on the measurement accuracy.
- Absolute measurements in every condition.
Test after test, the loading is precise,
repeatable and can be reproduced.
The instrument meets all ASTM EN ISO requirements.
Its use is advantageous in laboratories and in
manufacturing for total and continuous monitoring
of production in its different stages, leading to
great improvement in quality control during
manufacturing of components such as bearings, car
parts and safety-critical aeronautical materials.
ELECTRONIC MANAGEMENT OF TEST CYCLE
- Measuring data setting via keyboard.
- Rockwell and Brinell scale selection with direct
digital readout.
- Possibility of immediate conversion of the
result into other scales including tensile
strength R Kg N/mm2.
- Test time from 0.1 to 99.9 seconds.
- Upper and lower tolerance limits for segregation
of parts in production.
- Automatic check of test cycle with
auto-diagnosis and signals during the measuring
phase.
- Automatic raise and lower of the measuring head
over 50 mm travel.
- RS 232 C Data transmission for output to a
printer or computer.
- Possibility to obtain average and statistics of
results with diagram.
VERY HIGH PERFORMANCE
- Unaltered operation even in extreme conditions:
irregular, unfinished raised or misaligned pieces,
every kind of support (lifting screw, deformable
materials, etc.) presence of impurities (dust,
oil, etc.) between the test piece and the support
or between the support and the point of the
support.
CERTIFICATION
- Supplied with certificates on SIT primary
samples
|
|
|
Performance
|
SINGLE INITIATION OF COMPLETE OPERATION
INCLUDING AUTO CONTACT WITH TEST PIECE
- Following initiation by operating the Start
lever, the 206 RSD head moves down to reach the
test surface in distance multiples of 50 mm as
part of the continuous test sequence comprising:
- approach to the piece.
- clamping of the piece.
- indentation.
- complete measurement cycle and release of piece.
- Meets all laboratory requirements.
- Full operation even in presence of vibrations,
sudden changes in temperature or dusty
environments.
- Perfect and effective measurements including the
first test - Insensitive to deflections.
- Automatic compensation of deflection up to 50
mm.
- A -set-of anvils facilitates the positioning of
round and flat samples.
- The head goes down automatically to contact and
execute test cycle.
- Automatic clamping of test piece surface.
- High R. R. better than8.
- Large range of test loads (from 98.1 to 1839N).
AUTOMATIC
- Automatic load application and selection.
- Rapid sequence following indenter contact.
- High definition (0.1 HRC).
- Graphical illuminated display with high contrast
to obtain clear, quick and accurate readings.
SIMPLE AND UNIVERSAL
- High precision and rapidity of measurement.
- Full operation even in presence of vibrations,
sudden changes in temperature or dusty
environments.
- Immediate conversion.
- Effective statistics software incorporated with
connection to printer or computer in order to
supply: diagram, graph, tests list, average,
standard deviation.
|
|
|
|
|
 |
 |
|
Applying C shape indenter, difficult points such as: insides of tubes and
near hollows can be reached.
Clamping feature allows for testing large, overhanging parts with out the
need for additional fixtures. |
The 2 inch clamping stroke enables operations to clamp and test parts of
various sizes in one easy motion without the need for height adjustments
for easy of use and faster testing.
|
|
|
|
 |
 |
Flexible parts can be tested securely
|
The visible penetrator permits testing in hard to reach areas (code 13606) |
| |
|
|
